PALL-X 98 semi-gloss/matte Premium 2-component wood floor lacquer

Water-based 2-component wood floor lacquer for heavily used wood floors in residential and commercial areas, including industrial wood floors. The very good flow properties guarantee easy application and ensure an impressive and maintenance-friendly surface.


For very heavy use wood flooring in residential and commercial applications, including industrial locations. Suitable for:

  • sanded wood flooring
  • woodblocks
  • use on wood floors installed over warm water underfloor heating systems


  • very high resistance to mechanical and chemical wear
  • very good levelling capacity
  • very fast drying and final strength
  • very good levelling properties
  • extremely high abrasion resistance
  • ÖNorm 2354 Classification C
  • slip resistance R9 in combination with PALL-X GRIP R10
  • EN 71-3 (Child safe coating, p. 3: migration of certain elements)
  • fire protection Cfl-s1 (primer PALL-X 333 COLOR incl. PALL-X 333 C COLOR CONCENTRATE, minimum thickness solid wood 19 mm, density 480 kg/m³, moisture content 9%)
  • corresponds to TRGS 617

Technical data

*At 20 °C and 50 % rel. humidity.

plastic container


4,5 + 0,45 l

Shelf life:

at least 12 months

Gloss level:

semi-gloss, matte

Mixing ratio:

10 : 1

Consumption per coat:

approx. 100 ml/m²


approx. 10 m²/litre

Working climate:

between 18 – 25 °C and 35 – 65 % relative humidity

Pot life:

approx. 4 hours*

Ready for sanding:

after approx. 4 hours*

Further coats:

approx. 4 hours*

Final strength:

after approx. 7 days*

Fast construction:

PALL-X 320 or 325 in combination with two layers PALL-X 98.

Full mech. wear:

after approx. 24 hours*

Full chemical wear:

after approx. 72 hours*

Final strength:

after approx. 72 hours*

Ordering information

Article Packsize Shipping unit
PALL-X 98 matte 4,95 l 10094 4,5 + 0,45 l
Pallet :
PALL-X 98 semi-gloss 4,95 l 10093 4,5 + 0,45 l
Pallet :

Quality seals and badges



Austria - Naturparkhaus

Belgium - Elisabethzaal

Netherlands - Renovation of 1800 m² office space

Products and accessories

CLEAN Neutral pH cleaner for wood floors

Water-based cleaning agent for sealed and oiled wood and cork floors. Also suitable for PVC, linoleum, natural and artificial stone floors.

CLEAN STRONG Intensive cleaner for wood floors

Water-based cleaning agent for sealed wood and cork floors to remove care product deposits. Also suitable for PVC, natural and artificial stone floors (pre-testing necessary).

FINISH CARE Care product for sealed wood floors

Water-based care emulsion for initial and maintenance care on sealed wood and cork floors, pre-finished wood floors, linoleum, PVC, natural and artificial stone floors.

FINISH CARE STOP Slip-resistant care

Water-based and slip-resistant care emulsion for initial and maintenance care on sealed wood and cork floors, linoleum, natural and artificial stone floors.

PALL-X 350 2-component bonding agent for wood floors

Water-based 2-component polyurethane bonding agent for recoating sealed or oiled wood floors without intermediate sanding

PALL-X FILLER Premium wood floor joint filler

Water-based, fiber reinforced joint filler with very good filling capacity

PALL-X GRIP Structure powder

Powder additive to increase slip resistance R10 to DGUV norm 108-003, used with PALL-X 98

UZIN Multimoll Top 7 Insulation and Renovation Board

Stress-relieving underlay with acoustic and heat insulating properties for the subsequent installation of wood flooring and floor coverings

  • relieves tensions
  • for height adjustments
  • easy installation
  • acoustic and heat insulating properties

UZIN NC 182 Low-slump cementitious repair mortar

Moisture-resistant, low-slump and rapid repair mortar with reActivate effect for any range of thickness

  • ready to accept floor coverings after 60 minutes*
  • re-stirrable, longer working time
  • resistant agains alkaline moisture
  • fine grain, no visible patching marks

UZIN PE 360 PLUS Dispersion primer

Dispersion primer for absorbent substrates, screeds and concrete floors

Installation systems for screeds, floors and wood flooring

Machinery and special tools for substrate preparation and installation of floor coverings

Complete product range for installation, renovation and maintenance of wood flooring

Resin and cementitious floor finishes combining performance and design

Installation systems for tiling and natural stone

High quality painting, plastering and drywalling tools