PALL-X FILLER Premium wood floor joint filler

Water-based, fiber reinforced joint filler with very good filling capacity

Applications

Suitable for:

  • sanded wood flooring
  • woodblocks
  • use on wood floors installed over warm water underfloor heating systems

Properties

  • very fast drying
  • very flexible filling for joints up to approx. 3 mm
  • very good stability in the wood floor joint
  • high color fastness
  • very easily seen on the wood surface
  • does not clog abrasives
  • fiber-reinforced
  • suitable for all common wood species

Technical data

*At 20 °C and 50 % rel. humidity.
Packaging:

plastic container

Packsize:

5 l

Shelf life:

at least 12 months

Consumption per coat:

approx. 60 - 120 ml/m² (depending on joint size)

Coverage:

approx. 8 - 16 m²/litre (depending on joint size)

Working climate:

between 18 – 25 °C and 35 – 65 % relative humidity

Ready for sanding:

after approx. 30 - 45 minutes* depending on the joint size

Ordering information

Article Article number Packsize Shipping unit
PALL-X FILLER 5 l 162032 5 l
Pallet :
96

Quality seals and badges

Icon_EMICODE EC1_GB

Products and accessories

PALL-X 325 Premium wood floor primer

Water-based 1-component roller applied primer, for highly absorbent wood floor surfaces to prevent side bonding

PALL-X 96 Premium 1-component wood floor lacquer

Water-based, fast drying 1-component wood floor and cork flooring lacquer for heavy use residential and commercial areas

PALL-X 98 semi-gloss/matte Premium 2-component wood floor lacquer

Water-based 2-component wood floor lacquer for heavily used wood floors in residential and commercial areas, including industrial wood floors. The very good flow properties guarantee easy application and ensure an impressive and maintenance-friendly surface.

PALL-X SPORT 2K 2-component wood sports floor lacquer

Water-based 2-component wood floor lacquer for heavily used wood floors in sports facilities. PALL-X SPORT 2K achieves the coefficient of sliding friction according to DIN 18032 and EN 14904 and corresponds to ÖNorm 2354 stress category C.

Rapid spatula

Made of 0.3 mm thick, hardened and stainless spring steel strip

UZIN KR 416 2-Component Repair Resin

Low viscosity, multi-purpose acrylic resin for repairing screeds and concrete

  • very good penetration properties
  • fast curing
  • adjustable pot life and consistency
  • resistant to water and chemicals
  • frost resistant

UZIN NC 182 Low-slump cementitious repair mortar

Moisture-resistant, low-slump and rapid repair mortar with reActivate effect for any range of thickness

  • ready to accept floor coverings after 60 minutes*
  • re-stirrable, longer working time
  • resistant agains alkaline moisture
  • fine grain, no visible patching marks

UZIN PE 460 2-Component Epoxy Blocking Primer

Epoxy primer for damp or weak substrates, with coloured components to indicate when mixed

  • reduced odour during application
  • high barrier effect against moisture
  • very good surface penetration
  • resistant against water, frost and chemicals
  • system component in PAH renovation

UZIN PUR-Beschleuniger Accelerating Additive

Accelerator for 2-comp. PUR adhesives and levelling compounds

  • easy to dose
  • liquid consistency
  • reduced waiting time
  • no influence on the adhesive properties
  • no influence on the flowing properties of UZIN KR 410

UZIN Quartz Sand 0.8 Quartz Sand

Fire-cured quartz sand for filling and sprinkling (0.3 - 0.8 mm grain size)

  • creates gritted substrates to improve adhesion
  • fills and adjusts the consistency

Installation systems for screeds, floors and wood flooring

Machinery and special tools for substrate preparation and installation of floor coverings

Complete product range for installation, renovation and maintenance of wood flooring

Resin and cementitious floor finishes combining performance and design

Installation systems for tiling and natural stone

High quality painting, plastering and drywalling tools