PALL-X PURE 2-component wood floor lacquer creating a raw wood effect

Water-based 2-component wood floor lacquer for high traffic residential and commercial wood floors. PALL-X PURE creates an extremely matte look to untreated wood floors, inhibits the natural yellowing in wood floors and provides the so-called raw wood effect.

Applications

For heavy use wood flooring in residential and commercial areas.
Suitable for:

  • sanded wood flooring
  • use on wood floors installed over warm water underfloor heating systems

Properties

  • high resistance to mechanical and chemical wear
  • very good levelling capacity
  • special matte appearance
  • raw wood effect
  • fast drying and final strength
  • very good levelling properties
  • inhibits yellowing
  • corresponds to TRGS 617

Technical data

*At 20 °C and 50 % rel. humidity.
Packaging:

plastic container

Packsize:

4,5 + 0,45 l

Shelf life:

at least 12 months

Gloss level:

special matte

Mixing ratio:

10 : 1

Consumption per coat:

approx. 80 ml/m²

Coverage:

approx. 12 m²/litre

Working climate:

between 18 – 25 °C and 35 – 65 % relative humidity

Pot life:

approx. 1 hour*

Ready for sanding:

after approx. 5 hours*
up to 24 hours at high humidity

Further coats:

after approx. 5 hours*
up to 24 hours at high humidity

Final strength:

after approx. 7 days*

Ordering information

Article Article number Packsize Shipping unit
PALL-X PURE 4,95 l 10108 4,5 + 0,45 l
Pallet :
72

Quality seals and badges

References

Belgium - Cultuurcentrum

Netherlands - New installation of 60 m² oak

Netherlands - Renovation of 100 m² oak

Products and accessories

CLEAN Neutral pH cleaner for wood floors

Water-based cleaning agent for sealed and oiled wood and cork floors. Also suitable for PVC, linoleum, natural and artificial stone floors.

CLEAN STRONG Intensive cleaner for wood floors

Water-based cleaning agent for sealed wood and cork floors to remove care product deposits. Also suitable for PVC, natural and artificial stone floors (pre-testing necessary).

FINISH CARE Care product for sealed wood floors

Water-based care emulsion for initial and maintenance care on sealed wood and cork floors, pre-finished wood floors, linoleum, PVC, natural and artificial stone floors.

PALL-X 325 Premium wood floor primer

Water-based 1-component roller applied primer, for highly absorbent wood floor surfaces to prevent side bonding

PALL-X FILLER Premium wood floor joint filler

Water-based, fiber reinforced joint filler with very good filling capacity

PALL-X ZERO 2K Solvent-free 2-component wood floor lacquer

Water-based, solvent-free 2-component wood floor lacquer for high traffic wood floors in residential or commercial areas, ensuring optimum indoor air quality. PALL-X ZERO 2K features a low matte appearance that creates a natural beautiful surface.

UZIN Multimoll Top 4 Stress-Relief Board

Stess-relieving underlay for subsequent installation of wood flooring or floor covering

  • universal use
  • relieves tensions
  • low installation height
  • easy installation

UZIN PE 425 2-Component Water-Based Epoxy Primer

Universal epoxy primer for reinforcement of weak screeds or prior to direct installation of wood flooring

  • easy to use
  • deep reinforcement of the upper screed zone
  • improves shear strength
  • improves the bonding strength with UZIN STP and PUR adhesives
  • can be overlaid in combination with UZIN PE 280
  • diluted with 10% water
  • vapour diffusive

Installation systems for screeds, floors and wood flooring

Machinery and special tools for substrate preparation and installation of floor coverings

Complete product range for installation, renovation and maintenance of wood flooring

Resin and cementitious floor finishes combining performance and design

Installation systems for tiling and natural stone

High quality painting, plastering and drywalling tools