International

Product
- PALLMANN summarizes their full range offer for the installation, renovation and maintenance of wood flooring with this motto. We are professionals in the area of surface refinement with a tradition of more than 100 years offer matching products for all aspects of floor construction – from surface treatment, cleaning and maintenance, down to wood floor adhesives, products for subfloor preparation and machines.
Service
- - Contact partners worldwide
  - Download-Center
- We are a premium supplier with a complete range of products for the installation, renovation and maintenance of wood flooring. In addition to high quality products and systems, we offer a comprehensive service in the area of application technology and marketing.
Knowledge
- The challenge for the coming years is the further development of our products, with regard to fast processing, solvent-free, emission-free, sustainability and environmental friendliness, as well as adaptation to country-specific conditions, such as climate and processing.
References
- - Commercial
  - Residential buildings
- Here you will find an overview of selected pobjects from all over the world that have been refined with our high-quality products.
About PALLMANN
- As a professional in the field of surface finishing with a tradition of more than 100 years, we offer with our product range for every level of floor construction precisely matched products. So that you can deliver every wood floor surface as a masterpiece with your craftsmanship, we are at your disposal with our product systems and with advice and support.

Low-slump repair compound

UZIN NC 182

Low slump, fine and very quick-drying cement smoothing compound for any thickness range

Data sheet

Consumption calculator

- Product
- Subfloor preparation
- Subfloor preparation
- UZIN NC 182

Applications

Low-slump, fine and very fast setting cement smoothing compound for any thickness range.
Suitable for:

new or old cement, calcium sulphate screeds (may need a primer), stone-wood (Granwood) screeds, concrete, dense mineral-based substrates and similar
Chipboard P3 / P5 / P7 and OSB panels (each solidly fixed)
old substrates with strongly bonded waterproof adhesive and smoothing compound residues
also as „low-slump“ surface compound on old adhesive residues and for filling down too a „feather-edge“
as system component in rapid construction

producing absorbent, high-strength, ready for covering installation areas in a short amount of time
filling holes and cracks in most types of substrate particularly screeds or concrete floors
edge or repair work before final smoothing and gluing
patching of staircases and landings
high durability in residential, commercial and industrial areas
Hot water underfloor heating
chair castors according to DIN EN 12 529 from 1 mm compound thickness

Properties

ready for covering after 60 min.
hydraulically setting
rine grain, eliminates smoothing edges

Downloads

Product Data Sheet UZIN NC 182 GB

2 MB / PDF

2 MB

Safety Data Sheet UZIN NC 182

238 KB / PDF

238 KB

Technical data

Packaging:	paper bag
Packsize:	20 kg
Shelf life:	at least 12 months
Water ratio:	5 – 5.75 litres per 20 kg sack
Consumption:	approx. 1,5 kg/m²/mm thickness
Working climate:	at least 10 °C at floor level
Pot life:	approx. 15 minutes^*
Walkable:	after approx. 25 minutes^*
Set to covering:	after approx. 60 minutes^*
	*At 20 °C and 50 % rel. humidity. See also "application chart".

Ordering information

Article	Item no.	Packsize	Shipping unit
UZIN NC 182 / 20 kg	68546	20 kg	Pallet: 54

Do you have any questions?

[PALLMANN International] Flyout

PALLMANN Customer Service

PALLMANN worldwide